C400-1000 High Speed Precision Lathe
•Precision floor standing lathe built to a very high standard
•Large taper roller spindle bearings for precision running
•Deeply webbed, cast iron bed with ground, induction hardened slideways
•The max.speed reaches to 2000R.P.M
•Metric & imperial threads cutting
•Diametral pitches DP/DP, MP/MP
C400-1000 High Speed Precision Lathe | ||
---|---|---|
Project Name | Project Content | Parameter |
CAPACITY | Swing over bed | 400 mm |
Swing over cross slide | 248 mm | |
Center height | 200 mm | |
Distance between centers | 1000 mm | |
Bed width | 205 mm | |
Bed length | 1655 mm | |
HEADSTOCK | Spindle bore | 52 mm |
Spindle nose | D1-5 | |
Spindle bore taper in nose,in sleeve | M.T.#6 / M.T.#4 | |
Speeds number | 8 or 16 (optional) | |
Speeds range | 70-2000R.P.M. or 35-2000R.P.M.(2 speed motor) | |
CARRIAGE&COMPOUND | Cross slide width | 140 mm |
Cross slide travel | 208 mm | |
Compound rest width | 82 mm | |
Compound rest travel | 92 mm | |
Lead screw diameter | 22 mm | |
Lead screw thread | 2.5 mm | |
Feed rod diameter | 15 mm | |
Cutting tool max. section | 16 mm X 16 mm | |
THREADS&FEEDS | Threads imperials pitches | 34 Nos.4-56 T.P.I. |
Threads metric pitches | 26 Nos.0.4-7mm | |
Threads diametral pitches | 36 Nos.8-112 D.P. | |
Threads module pitches | 23 Nos.0.25-3 M.P. | |
Longitudinal feeds imperial | 0.002"-0.548"/Rev.(32Nos) | |
Longitudinal feeds metric | 0.052-1.392 mm/ Rev.(32Nos) | |
Cross slide feeds imperial | 0.0007"-0.0187"/Rev.(32Nos) | |
Cross slide feeds metric | 0.014-0.380 mm/ Rev.(32Nos) | |
TAILSTOCK | Quill diameter | 42 mm (1 21/32”) (NO.4 M.T.) |
Quill travel | 114 mm (4 1/2”) (NO.4 M.T.) | |
Quill taper | NO.4 M.T. | |
Set over | 10 mm(±3/8") | |
MOTOR | For main motor | 3HP,3PH |
Coolant pump motor | 1/8 HP,3PH | |
WEIGHT&MEASURES | Machine dimension (LxWxH) | 1930x800x1305 mm |
Packing dimension (LxWxH) (1set/case) | 1940x800x1600 mm | |
NW(Kg) (1set/case) | 685 Kgs | |
GW(Kg) (1set/case) | 815 Kgs |