• Name: alessandro
    Date: 2010-04-07 05:52:07
    [No: 1014]
    I need manual of spare part for BV21-520 Valex..is our product? in affermative case, please indicate me a Quick change tool post for this lathe..and where is possible to bay..regards
    Alessandro

    Dear Alessandro,

    Thank you for your letter, I will contact with you by email.

    Best regards,

    nancy

     

  • Name: Tony Coomber
    Date: 2010-04-06 22:04:48
    [No: 1013]
    Help

    I have aquired a CO micro lathe and whilst I can get a cross slide, I do not appear to be able to identify a supplier for the tailstock. Axminster (UK Supplier) do not list it on their web site.

    Regards.
    Tony Coomber.
    Test Laboratory Manager.

    Dear Tony,

    Thank you for choosing SIEG machine.

    If you want to buy it from Axminster, please contact with them . They can place an order to us and order it for you.

    Best regards,

    Nancy

  • Name: Blaž Cestnik
    Date: 2010-04-02 01:52:44
    [No: 1012]
    Hello Sieg,
    I am very happy owner of SIEG-C2 Model 300. After 3 year working, I have a problems with speed controller for motor. When I switch it ON and than turn potentiometer to minimum RPM, he run on maximum RPM. (I think the problem is in voltage regulator)
    Can you give me a PCB (wiring) drawings of this speed controller, please?
    Thank you and best regards.

    Blaž Cestnik, Slovenia

    Dear Cestnik,

    Thank you for choosing SIEG machine.

    We have made two kinds of PCB for SIEG-C2 Model 300,there are sign on it,  one start with FC***, another start with XMT***, so please tell me which one your PCB start with , thank you.

    And also, I will send the detail information to you by email.

    Nancy

    email:nancy@siegind.com

     

  • Name: Rod Rutherford
    Date: 2010-03-28 16:26:08
    [No: 1011]
    Hi,
    I was wanting to know when the new SC2 lathe and other brushless motor items will be available for sale, here in Australia?

    I have not seen any via web sites as yet.

    regards Rod

    Dear Rod,

    Very glad to hear from you.

    We have distributor in Australia, so you can contact with them and buy the products from them. And the web of the distributor is : carbatec.com.au ,please contact with them directly , thank you.

    Best regards,

    Nancy

  • Name: luca
    Date: 2010-03-26 15:47:34
    [No: 1010]
    Dear Sieg
    I like very much your nano lathe and your C0 lathe. Can you invie me the lathes in italy?

    Thanks & Best Regards

    Luca

    Italy

    Dear Luca,

    Sorry for not reply you in time.

    We do not have distributor in Italy now, but we  have distributor in Franch which is near from you , so you can buy the machine from them, and the web is : otelo.fr , you can contact with them, thank you.

    If you have any other problem or can not buy the machine from  them , please feel free  to  contact with me ,thanks.My email:nancy@siegind.com

    Best regards,

    Nancy

  • Name: Anthony
    Date: 2010-03-22 05:18:56
    [No: 1009]
    Can you give me the spec on the motor please of your Sieg X1 Micro Mill.
    I want to upgrade the motor while keeping the stock electronics.
    As much information as possible would be great.

    Dear Anthony,

    Thank you for using SIEG machine.

    I will send  the motor specification to you by email.

    Best regards,

    Nancy

  • Name: Martin Strandbygaard
    Date: 2010-03-19 03:53:07
    [No: 1008]
    Hi,

    I have seen a few remarks about an extended table option for the SX3.

    Is there such an option for the SX3, what is the price, and how do I purchase it?

    I am located in Scandinavia, and have inquired the Scandinavian dealer about this, and they asked me to direct this question to Technical support.

    Dear Martin,

    Thank you for choosing SIEG machine.

    For the detail information about SX3 extended table, please contact with our sales manager MS you, email:you@siegind.com.  Thank you.

    Best regards,

    Nancy

  • Name: Martin Strandbygaard
    Date: 2010-03-19 03:44:01
    [No: 1007]
    Hi,

    How much spindle runout can I expect in an SX3?

    Dear martin,

    Thank you very much for using SIEG machine.

    The spindle runout is 0.02mm .

    Best regards,

    Nancy

  • Name: Jeremy Watson
    Date: 2010-03-18 20:33:50
    [No: 1006]
    Dear SIEG Industrial

    I have a CL300 mini lathe marketed by Clarke in the UK. It is a very useful machine but unfortunately, the J series motor controller has ceased to function. I have bought an xmt-2325(p) board as a replacement from Axminster Ltd, but they are unable to provide me with a wiring diagram to help me install it. The box label shows the following:
    P148387
    BURT000610
    1PCS

    I have searched the internet and found a wiring diagram provided by Micromart in the USA which shows most of the connections, but not all those on the board I have purchased. In particular, I need to know where to connect terminals K3 & K4 and the two terminals labelled “GANâ€.

    Could you please e-mail instructions or a wiring diagram specific to this board.

    Many thanks in anticipation.

    Best regards

    Jeremy Watson

    Dear Jeremy,

    Very glad to hear from you.

    Can you send me more information about it,you can take the picture of it ,note which one you donnot know, and send them to my email, I will reply you as soon as possible.Thank you.

    my email:nancy@siegind.com

    Best regards,

    Nancy

  • Name: Jeroen Vissers
    Date: 2010-03-15 20:04:22
    [No: 1005]
    I am located in Thailand, and the prices they ask here for a M4 multipurpose Mill / Lathe, is twice as much as they sell them for in the states.
    I got the quote from Posh.com

    Dear Jeroen,

    I am very sorry for the question, but I cannot open Posh.com.

    For further information, please contact with our sales manager Ms Tao (tao@siegind.com),she can deal with the problem.Thank you.

     Best regards,

    Nancy





5 + 3 =

Submit Cancel