• Name: Kuenstler Wolfgang
    Date: 2010-07-06 01:32:50
    [No: 1064]
    Hi,

    I am looking for technical documentation about the Sieg SX2
    e.g. circuit diagramm, parts list, ...

    Thanks and regards

    Wolfgang Künstler

    Dear Wolfgang kuenstler,

    Thank you very much for your information.

    I can send the SX2 manual to you , which contain the parts list ,wiring diagram and etc. I will send it to you by email later.

    Best regards,

    nancy

  • Name: Robert
    Date: 2010-07-02 08:16:43
    [No: 1063]
    I heard people buy the KX1 Mach or the KX3-Mach directly from you.
    I always thought I would have to go through my local distributor?

    How much would the KX1 or the KX3 -Mach be?

    I am located in in the US (Oregon).

    PS: Congratulations on some really great products.

    Dear Robert,

    Very thank you for your praise, we will try our best to do better with your encouragement.

    We have distributors who sale the KX1-mach and KX3-mach, please contact with them directly, the website is  http://www.littlemachineshop.com/3503/ .Thank you. The distributor can offter you good after sales service.

    Best regards,

    Nancy

     

  • Name: d thompsn
    Date: 2010-07-01 04:00:01
    [No: 1062]
    nancy can you send me controller board drawing for sieg xmt 2325 please.

    regards dave

    Dear Dave,

    Thank you for your information.

    I will send the wiring diagrame to you buy email.

    Best regards,

    Nancy

  • Name: steve berkstresser
    Date: 2010-06-28 12:38:10
    [No: 1061]
    i am trying to add a cnc digispeed xl motor control to my sieg super x3 milling machine and need to know the wiring diagram of the motor controller to know where to insert the control wiring.

    could you send me detailed wiring diagram of the motor controller, etc.

    many thanks

    Dear  steve,

    The X3 milling machine can not be changed to CNC machine by your self .

    We have CNC machine KX3 which is CNC machine and has the same function with X3, maybe you can consider of it. Thank you.

    Best regards,

    Nancy

  • Name: Richard Thomason
    Date: 2010-06-24 23:32:32
    [No: 1060]
    Hi,
    I have a Sieg X1 MIll which I am converting to CNC.

    I would apprecieate it if you could send me a shematic of the Motor Control Cicuit, so that I can examine the possiblity of adding CNC control of the motor speed.

    Thanks in advance
    Richard

    Dear Richard,

    This machine can not be changed to CNC machine.

    We have the CNC machine KX1 which have the same function with X1, and you can get more detail infromation from our website.thank you.

    Best regards,

    Nancy

  • Name: Simon
    Date: 2010-06-21 22:52:00
    [No: 1059]
    Hi,
    I am looking to purchase your M4 lathe/mill and was wondering if you manufacture a machine vice which will mount on the lathe cross slide. It looks like the slots are 75mm ctrs.

    Also do you manufacture a quick change adjustable tool post? I am in the UK and Axminster do not list one.

    Many thanks
    Regards
    Simon

    Dear Simon,

    Thank you for keen on our products.

    I will send you the detail information and pictures of the product by email ,thank you.

    Best regards,

    Nancy

  • Name: Dennis Dingeldein
    Date: 2010-06-19 18:23:42
    [No: 1058]
    Hello,
    during a move the Y axis handle (hand wheel) of my sieg X1 micro mill was destroyed. Where can I order a replacement? I am from germany/europe
    but am willing to order anywhere.
    Regards
    Dennis

    Dear Dennis,

    Thank you for using SIEG machine.

    We have distributors in Germany, so you can contact with them to buy the parts.There are two on our website,http://knuth.de/?SESSION_intSprache_ID=2 and http://www.ar-tec.de/, please take as reference, thank you.

    Best regards,

    Nancy

     

  • Name: mark hill/sydney boating & tool supplies
    Date: 2010-06-11 10:48:22
    [No: 1057]
    Hello,does you C6 lathe come with auto cross feed
    regards mark

    Dear Mark,

    The C6 lathe has no auto cross feed, it has auto feed in Longitudinal axis .

    Best regards,

    Nancy

  • Name: Flavien
    Date: 2010-06-09 14:51:55
    [No: 1056]
    Hello, I have a problem with my C1, the overload protection setting is
    too sensitive (setting was fine when at the beginning). Is there a way
    to adjust the setting of the protection. Also want to precise that I
    changed the control board 3 times...
    Thanks for your reply. Rgds

    Dear Flavien,

    Thank you for using SIEG machine.

    I will communicate with our engineer about the problem, and then reply you by email.thank you for your waiting.

    Best regards,

    Nancy

  • Name: Oliver Malham
    Date: 2010-06-09 01:40:45
    [No: 1055]
    Hi,
    I had to send back the control board for my X1 mill to my supplier, to fix a fault. I received the repaired board, but I think the wiring diagram that I made when I removed it has an error, as the mains fuse blows every time I try and turn it on. Can you please send me a wiring diagram for the control board so I can correct this?

    Thank you,

    Oliver Malham

    Dear Oliver,

    I am sorry for the problem.

    I will contact with you by email to send you the wiring diagram, hope your machine will works well soon.

    Best regards,

    Nancy





3 + 5 =

Submit Cancel