I want buy 2 model:KX3 and KC6 have informations.
Sieg Shanghai industrial.Co
KX3 CNC MILL:

Drilling capacity 16 mm(0.6")
Table effective size 550x160 mm(22"x6.3")
Table travel - X axis 300 mm(12")
Table travel - Y axis 120 mm(4.7")
Head travel - Z axis 270 mm(11")
Motor of X axis 4 N
Motor of Y axis 4 N
Motor of Z axis 6 N
Throat 232 mm(9")
Table T-slot size 12 mm(0.5")
No. of T-slots on table 3
Position accuracy 0.01 mm
Spindle taper MT3/R8/BT30
Speed of Spindle 100 - 5000 RPM
Max. Spindle motor torque @ 1500RPM 5.5 N.m.
Spindle motor power 1000 W
Machine size (LxWxH) 870x690x1625 mm
Packing size (LxWxH) 1050x1040x1880 mm
Weight (n.w./g.w.) 240/285 KG

SIEG KC6 LATHE CNC.

Swing 250 mm(10")
Max distance 450 mm(18")
The width of bed 135 mm(5.3")
The speed of the spindle 100-1750 r/min
The tape of the spindle MT3
The speed of moving Z 2000 mm/min(79")
X 1000 mm/min(39")
The speed of feeding Z 500 mm/min(20")
X 250 mm/min(10")
Max travel X 180 mm(7")
Z 320 mm(13")
Motor of X aixs 4 N
Motor of Z aixs 4 N
Tool position 4
Angle of the tool post 360o
Tape of tailstock MT2
Travel of tailstock 50 mm(2")
Return orientation precision (X??) 0.01 mm
Tool post return orientation precision 0.005 mm
Power 1000 W
Machine size (LxWxH) 1370x700x1450 mm
Packing size (LxWxH) 1570x980x1685 mm
Weight (n.w/g.w) 420/490 KG
...
Can you share to me about your product,if i from Viet nam where can buy...?

i have a SX3 mill and the drawbar and drill chuck were lost during a move.Do you know where i could get replacements anywhere in Canada or USA
Thankyou
Glenn Biggleston
Signature Cycle
Windsor ON Canada

Hi, I am looking to buy a small lathe and have been thinking about a sieg C3.
Do you people make the Micromark lathe ??
or is it the same lathe as a C 3 ?
Could you send me the latest particulars and specs of the currant C 3 Model Lathe.
Thank you for your time
Regards Alf Harper
Queensland
Australia

I have been trying to contact any person at your company.
I send the transfer to buy a bench lathe C3, and send the transfer, but nobody respond me, I contacted at first with Mr. Willie You, but seems to be in a trade show, tried sales@........ but did not respond too.
To whom I have to write in order to check out the transfer and begin to program my C3.
Thank
Manuel

Hi

I have got my X1 Micro Mill in the metric version.
The scales on the dials on the X- and Y- axis are divided into 80 divisins (0-10- 20- ...-70) and the movement of the table is 2 mm per revelution of the handle.
This is a little confusing. Is this correct?
Do you have another scale for the metric machine (e.g. 0-....-2.0)?

BR
Ole

Hello,
I have a M4MA (C4+X1).
Could you advise if there is a thread chasing dial to fit this machine and its part number.


Thank you

Mike

Hi Nancy,

Please try this new email (in section above).

Sorry, but I do not know what the problem is with the other address.

Thanks

Dave

Hi Nancy,

Do you have a USA dealer/distributor for your KC6-Sieg CNC Lathe?

Also, thanks in advance for the email regarding CNC Milling Software [KX3 stepper motor version]. Although I Have not received your email as yet.

Have a great day!
Dave

Hi Annie,

Please provide a link to the latest CNC Milling software download for the Seig Ethernet Controller and Stepper motors.

I have CNC Milling V2.30 Build 355a but it is for a Servo system and my KX3 (SIEG-KX3B-14E) has a SIEG Ethernet Controller with Stepper Motors with Sieg 4th Axis.

Thanks, Dave

I have a C4 lathe and I need to make a special custom work holding plate.
I need the dimensions of the chuck holding holes pattern.

A drawing of the existing C4 faceplate will be of great help since I can use it as an example to design the bottom part of my custom work holder.

Thanks
Eli.

P.S.
The drawings of the C4 oil drip tray that you sent me before (when I designed a movable C4 lathe stand), were of great help.

You can see the result in http://www.cnczone.com/forums/showthread.php?t=107915